,,

PRODUCT

PRODUCT 



Hot Foil Stamping 
Die Cutting Machine 
Speed Sheet Cutter 
Creasing & Die Cutting Machine 
- Creasing machine
- Gilding machine
Stripping & Blanking Machine 
- Row by Row Series
- Full Sheet Series

MHC 1100E/1300E/1350E/1500E/1650E
Automatic Die Cutting Machine (Tiptronic)

Features Introduction

MHC Series Automatic Die Cutting Machine is equipped with servo motor control system, thus makes sure thick and thin paper feeding function effectively, paper feeding system can be divided into three types: 1. single piece of paper feeding function (for 4 – 8mm corrugated paper), 2. two pieces of overlapping paper feeding function (for 2 – 4mm corrugated paper), 3. multiple pieces of overlapping paper feeding function (for to 250g – 2mm paper). This machine including both manual paper feeding and automatic feeder paper feeding function. On condition of flat corrugated paper, automatic feeder paper feeding is accepted with raising efficiency and reducing workforce. Manual paper feeding comes in handy on condition of uneven corrugated paper. This machine maintains multi-operational function, and its development is combined with advantages of similar products in domestic and overseas, is special equipment for packing products such as cartons and paper boxes. Gripper bars with high intensity are applicable to all kinds of cardboard, paperboard and corrugated paper. Frontal, back and side registration mechanism ensures great precision of die cutting. Other parts are adopted such as intermittent mechanism with high precision, pneumatic clutch and pneumatic closed up mechanism, programmable controller and man-machine interface. The interface can display various digital information of machine such as working speed, amount of paper processed, total running time, etc. It is easy to eliminate troubles according to the display of trouble shooting. Transducer is adopted to control the main motor in achieving step-less speed variation.
This machine is equipped with sensors and safety device to ensure normal operation of machine and safety of workers.

Partial Introduction

Feeder unit

Feeder lifting device(Tiptronic function)

Servo motor conveyor positioning device

Three paper feeding modes:
● Single-sheet paper feeding (suitable for 4-8.5MM corrugated cardboard)
● Double-sheet overlapping paper feeding (suitable for 2-4MM corrugated cardboard)
● Multiple-sheet overlapping paper feeding (suitable for paper with a thickness of ≤2MM)

Timing belt drive, Intermittent mechanism

High-precision imported intermittent splitter, capable of maintaining high positioning accuracy even after long-term use.

Non-stop roll-up curtain type paper delivery device

Main collecting device and Auto non-stop roll-up type auxiliary collecting device switch automatically without any operation, significantly enhancing productivity.

Electric appliance unit

Adopts electrical components of world famous brands(MOELLER\OMRON) for better performance and in time and local after-sale-service and maintenance.

Auto lubrication system

The whole machine adopts a centralized automatic oil supply system to ensure that the transmission parts are not short of oil.

Configurations

Conveying Unit	MHC-1100E/1300E/1350E/1500E/1650E
01. Non-stop high-speed paper feeding section	〇
02. Feeder lifting device(Tiptronic function)	〇
03. Fish-scale powerful paper suction feeder head with 4 suction and 6 delivery. The suction head can be adjust to various suction angles according to the deformation of the paper	〇
04. Adjustable suction blower, suction head and air separation valve processed with ultra-hard alloy	〇
05. Triple feeder head anti-collision device	〇
06. Horizontal paper separation blower	〇
07. Electrical left/right fine-tuning device for the main feed pile	〇
08. The pre-stacking device is equipped with rails so that the operator can accurately and conveniently send the stack of paper into the feeder	〇
09. The paper alignment adjustment device can manually adjust the distance before the paper reaches the gauge without stopping the machine	〇
10. Push-pull dual-purpose side gauges, one set for the operation side and one set for the transmission side. Side gauges can be adjusted between push-pull gauges to meet different paper requirements	〇
11. Photoelectric detection of side gauge and front gauge	〇
12. Servo motor conveying and positioning device	〇
13. Three paper feeding modes: 1)Single-sheet paper feeding (suitable for 4-8.5MM corrugated cardboard) 2)Double-sheet overlapping paper feeding (suitable for 2-4MM corrugated cardboard) 3)Multiple-sheet overlapping paper feeding (suitable for paper with a thickness of ≤2MM)	〇
14. Electromechanical double sheet detector	〇
15. Imported paper feeding belt and stainless steel transfer plate	〇
16. Pneumatic lifting device for paper feeding frame	〇
17. PLC and electronic cam control the timing of the whole machine	〇
18. Blow-suction dual-purpose vacuum pump of German Becker brand	〇
Die-cutting Unit
01. The entire machine casting is made of QT-700-2 nodular cast iron	〇
02. Imported worm gear, worm gear and 40cr crankshaft	〇
03. A complete set of imported anodized aluminum alloy gripper bars and positioning structure, fine steel gripper teeth and supporting gripper plates. The gripper bars adopt an adjustable gripper bar structure	〇
04. Imported main drive chain	〇
05. Imported intermittent splitter	〇
06. Imported synchronous belt and pulley drive	〇
07. Imported pneumatic clutch brake device	〇
08. Pressure regulating device, which can realize accurate control of pressure through PLC touch screen buttons	〇
09. Die-cutting pressure is measured directly and accurately by deformation measuring device and displayed on the human-machine interface	〇
10. Die-cutting base plate and die mould rotary device	〇
11. The connection between the die cutting plate and the chase adopts the form of grasping snail and screws, adopt central positioning system, which is fast and accurate	〇
12. The die-cutting chase and the lower mat are locked by the Japan SMC gas regulator, which can prevent improper locking of the upper frame caused by human error during installation	〇
13. Japan SMC air pressure detection device, low air pressure alarm	〇
14. Equipped with an air storage tank to ensure the stability of the air pressure of the whole machine	〇
15. The whole machine adopts a centralized automatic oil supply system to ensure that the transmission parts are not short of oil	〇
Delivery Unit
01. Roll-up curtain type auxiliary paper delivery device, can realize non-stop paper delivery	〇
02. Adjustable mechanical paper delivery brush press mechanism to help gripper bar discharge and stack paper	〇
03. Paper delivery alignment device	〇
04. Photoelectric detection of upper and lower limit switches can effectively prevent the paper stacking table from excessive paper pile stacking and paper curling up	〇
05. The two-way auxiliary air blowing for paper delivery and the manual sampling mechanism make the operation convenient	〇
06. Spring chain adjustment device: Adjusting the tension of spring chain can reduce the inertia impact during the steerings of the gripper bar, and maintain the balanced tension of the chain	〇
Electrical Parts
01. Self-developed PLC control system(Invention Patent)	〇
02. The die-cutting unit adopts 10.4-inch touch display screens	〇
03. The machine adopts Germany Moeller brand relays, AC contactors, air switches and buttons, to ensure the stability and reliability of electrical parts	〇
04. The machine adopts Japanese Omron brand photoelectric switch, optical fiber, encoder and sensor, to ensure the accuracy and stability of electrical detection of each part of the action	〇

Note: This allocation sheet is for reference only, the formal allocation sheet is subject to the contract. Standard configuration: 〇; Optional: △

Main Technical Parameter

Model	MHC-1100E	MHC-1300E	MHC-1350E	MHC-1500E	MHC-1650E
Max. Sheet Size	1100×790mm	1290×940mm	1350×1100mm	1500×1100mm	1650×1200mm
Min. Sheet Size	400×350mm	470×450mm	470×450mm	470×450mm	550×500mm
Max. Cutting Size	1070×770mm	1280×920mm	1330×1080mm	1480×1080mm	1620×1180mm
Min. Gripper Margin	9-17mm	9-17mm	9-17mm	9-17mm	9-17mm
Cutting Rule Height	23.8mm	23.8mm	23.8mm	23.8mm	23.8mm
Inner Chase Size	1100×790mm	1310×950mm	1390×1120mm	1510×1120mm	1682×1220mm
Stock Range	Cardboard：≥200g/m2；Corrugated board: ≤7mm, E, B, C, A and AB corrugated pape	Cardboard：≥200g/m2；Corrugated board: ≤8.5mm, E, B, C, A and AB corrugated pape	Cardboard：≥200g/m2；Corrugated board: ≤8.5mm, E, B, C, A and AB corrugated paper	Cardboard：≥250g/m2；Corrugated board: ≤8.5mm, E, B, C, A and AB corrugated paper	Cardboard：≥350g/m2；Corrugated board: ≤8.5mm, E, B, C, A and AB corrugated paper
Die Cutting Accuracy	≤±0.1mm	≤±0.15mm	≤±0.15mm	≤±0.15mm	≤±0.2mm
Max. Die Cutting Force	300T	400T	400T	400T	400T
Max. Working Speed	7500s/h	5500s/h	5500s/h	5500s/h	4500s/h
Max. Feeder Pile Height	1600mm (With pallet)	1600mm (With pallet)	1600mm (With pallet)	1600mm (With pallet)	1600mm (With pallet)
Max. Delivery Pile Height	1400mm (With pallet)	1400mm (With pallet)	1400mm (With pallet)	1400mm (With pallet)	1400mm (With pallet)
Main Motor Power	11KW	11KW	15KW	15KW	18.5KW
Full Load Wattage	18KW	18KW	22KW	22KW	26KW
Air Requirement	Pressure: 0.6-0.7Mpa, Flow: ≥0.37m³/min	Pressure: 0.6-0.7Mpa, Flow: ≥0.37m³/min	Pressure: 0.6-0.7Mpa, Flow: ≥0.37m³/min	Pressure: 0.6-0.7Mpa, Flow: ≥0.37m³/min	Pressure: 0.6-0.7Mpa, Flow: ≥0.75m³/min
Net Weight of Machine	16T	18T	20T	21T	23T
Machine Dimensions	6440×4256×2350mm (L×W×H) (L: paper prepared track included, W: platform included)	8276×4506×2467mm (L×W×H) (L: paper prepared track included, W: platform included)	8033×4688×2435mm (L×W×H) (L: paper prepared track included, W: platform included)	8546×4706×2452mm (L×W×H) (L: paper prepared track included, W: platform included)	9144×5117×2582(L×W×H) (L: paper prepared track included, W: platform included)